剎車油關系到行駛車輛的制動性能，也關系到駕乘人員的安全。剎車泵漏油怎么辦？讓我們來看看相關的解決辦法吧。

Brake oil is related to the braking performance of driving vehicles and the safety of drivers and passengers. What if the brake pump leaks oil? Let's take a look at the relevant solutions.

制動泵分為制動主缸和制動缸。制動總泵位于發動機艙內，與制動油罐相連。制動缸安裝在四個車輪上。因此，在判斷故障時，要注意區分，確定哪一個是具體的。泵漏油。

The brake pump is divided into brake master cylinder and brake cylinder. The brake master cylinder is located in the engine compartment and is connected with the brake oil tank. The brake cylinder is mounted on four wheels. Therefore, when judging the fault, we should pay attention to distinguish and determine which one is specific. The pump leaks oil.

如果制動泵漏油嚴重，故障燈會報警。只要?jiǎng)x車系統報警或感覺剎車失靈，就要及時檢查剎車油是否在標準范圍內。如果剎車油不足嚴重，可以判斷漏油。至于是制動泵漏油還是油管漏油，還需要進一步判斷。如果制動泵漏油，建議是更換新泵，同時需要更換新的制動液；如果油管漏油，則需要更換油管或相關配件。

If the brake pump leaks oil seriously, the fault light will alarm. As long as the brake system alarms or feels brake failure, it is necessary to timely check whether the brake oil is within the standard range. If the brake oil is seriously insufficient, oil leakage can be judged. As for whether the brake pump leaks oil or the oil pipe leaks oil, further judgment is needed. If the brake pump leaks oil, it is recommended to replace the pump with a new one and replace the brake fluid at the same time; If the oil pipe leaks oil, it is necessary to replace the oil pipe or related accessories.

濟南沃爾沃汽車養護人員認為如果在行駛過程中制動油泵出現漏油，首先是汽車在制動時，制動減速度小，制動距離長，液壓制動系統產生的制動效率差。以移動踏板的行程、踩剎車踏板時的軟硬感覺、踩剎車踏板后的穩定性來判斷。

Jinan Volvo car maintenance personnel believe that if there is oil leakage in the brake oil pump during driving, the first reason is that when the car is braking, the braking deceleration is small, the braking distance is long, and the braking efficiency produced by the hydraulic braking system is poor. Judge by the travel of the moving pedal, the soft and hard feeling when stepping on the brake pedal, and the stability after stepping on the brake pedal.

剎車時，如果踏板高度下降緩慢，說明剎車管路某處斷裂，接頭密封不好，主缸或副缸活塞密封不好，回油閥而且出油閥不好?？梢韵炔认轮苿?dòng)踏板，觀察制動液有無泄漏。如果外部正常，檢查分泵或主缸故障。連續制動幾英尺時踏板高度略有增加，有彈性感，說明空氣已滲入制動管路。

When braking, if the pedal height drops slowly, it means that the brake pipeline is broken somewhere, the joint seal is not good, the piston seal of the master cylinder or auxiliary cylinder is not good, and the oil return valve and oil outlet valve are not good. Press the brake pedal first and observe whether the brake fluid leaks. If the outside is normal, check the slave cylinder or master cylinder for failure. When braking for several feet continuously, the pedal height increases slightly, which indicates that the air has penetrated into the brake pipeline.

如果您想知道剎車泵漏油怎么辦等更多安全駕駛知識和交通安全知識，請繼續關注我們的網站http://www.fmghkd.cn，希望今天的內容可以對大家有所幫助。

If you want to know more about safe driving and traffic safety, such as what to do if the brake pump leaks oil, please continue to follow our website http://www.fmghkd.cn , I hope today's content can be helpful to you.