寶馬維修中常見故障燈亮處理方法進入電子化時代的汽車已經對全車控制有了長足的進步，車輛的各種狀態都會以指示燈的形式顯示在儀表盤上，并且在裝配有多功能顯示屏的車上還會有相應的文字信息提示。
濟南寶馬汽車專修小編為大家整理出常見的故障燈亮的處理方法：
In the era of electronics, cars have made significant progress in controlling the entire vehicle. Various states of the vehicle are displayed in the form of indicator lights on the dashboard, and there are corresponding text message prompts on vehicles equipped with multi-functional displays. Jinan BMW Automotive Professional Repair Editor has compiled common troubleshooting methods for malfunction lights:
1.寶馬發動機故障燈
1. BMW engine fault light
發動機故障燈--發動機運行平穩性、動力性能、環保性能；常見原因是由于燃油品質引起，聯系工作人員。
Engine fault light - engine running smoothness, power performance, and environmental performance; The common reason is due to fuel quality. Please contact the staff.
2.寶馬胎壓報警
2. BMW tire pressure alarm
輪胎缺氣或氣壓過高，或更換了輪胎------切忌輪胎缺氣行駛；建議養成每天早上行車前先檢測四輪胎壓的習慣。
If the tire is out of air or the air pressure is too high, or if the tire has been replaced - do not drive with a tire out of air; It is recommended to develop the habit of checking the four tire pressures before driving every morning.
3．寶馬剎車片報警
3. BMW brake pad alarm
制動片已達磨損極限，請盡快到維修廠進行檢測更換。
The brake pads have reached their wear limit. Please go to the repair shop for testing and replacement as soon as possible.
4．寶馬剎車輔助系統報警
4. BMW brake assist system alarm
ABS,ESP報警-低速駕駛，謹慎駕駛；盡快去維修廠檢查。
ABS, ESP alarm - low speed driving, cautious driving; Go to the repair shop for inspection as soon as possible.
5.寶馬電瓶報警
5. BMW battery alarm
電瓶缺電。或者發電機不工作或工作不良好；電瓶損壞；請聯系服務人員。
The battery is out of charge. Or the generator does not work or works poorly; Battery damage; Please contact the service personnel.
6.寶馬氣壓/液壓系統報警
6. BMW pneumatic/hydraulic system alarm
氣壓/液壓懸掛報警--立即停車，檢查車身高度是否正常，請聯系服務人員。
Pneumatic/hydraulic suspension alarm - stop immediately and check if the vehicle height is normal. Please contact the service personnel.
7.寶馬機油液面報警
7. BMW oil level alarm
機油液面報警--立即停車，檢查機油油量和發動機外部是否泄漏；請聯系服務人員。
Oil level alarm - immediately stop the vehicle and check the oil level and whether there is any external leakage from the engine; Please contact the service personnel.
8.寶馬雨刮液面報警
8. BMW wiper fluid level alarm
雨刮液不足，請?zhí)砑雍线m的雨刮液。
Insufficient wiper fluid, please add suitable wiper fluid.
9.寶馬水箱液面報警
9. BMW water tank level alarm
水箱液面報警/水溫過高--立即停車，聯系4S店服務人員；切忌繼續行車，檢查冷卻液是否缺損的時候，切記不要擰開冷卻液水壺蓋。
Water tank level alarm/high water temperature - stop immediately and contact the 4S store service personnel; Do not continue driving. When checking for coolant defects, do not unscrew the cap of the coolant water bottle.
10.寶馬燈光報警
10. BMW light alarm
遠光燈，近光燈，霧燈，駐車燈，示寬燈，彎道燈，轉向燈，制動燈，倒車燈，尾燈，牌照燈等，出現故障都能引起燈光報警。
High beam lamp, low beam lamp, fog lamp, parking lamp, side marker lamp, bending lamp, turn signal lamp, brake lamp, reversing lamp, tail lamp, license plate lamp, etc. can cause light alarm in case of failure.
總之，只要了解這些指示燈含義，才能知道愛車出了什么狀況，該怎么處理。更多相關事項就來我們網站
http://www.fmghkd.cn咨詢吧！
In short, as long as you understand the meaning of these indicator lights, you can know what is wrong with your car and how to handle it. For more related matters, come to our website http://www.fmghkd.cn Consult!
